INVITATION TO BID

for the REHABILITATION AND CONSTRUCTION OF NEW DRINKING WATER EARTHEN PONDS, construction OF Boundry WALL THQ BHAG AND DEVELOPMENT OF 25+15 TEST  SHALLOW BOREHOLES WITH INSTALLATION OF ELECTRIC/SOLAR PUMP, PLASTIC TANKS WITH COMPLETED ON SITE

Last date & time for issuance of ITB: 28 March, 2022  till (05-pm)
Last date & time for Tender submission: 28 March 2022 (5 pm)
Tender Opening date and time: At the discretion of SPO
Tender Fee: Nil

GENERAL INFORMATION

The Office of the Strengthening Participatory Organization Quetta Region invites sealed bids from qualified Vendors / Contractors and Construction firms, who are registered with the Government of the Islamic Republic of Pakistan having a valid 2021-22 Pakistan Engineering Council (PEC) Certificate to submit offers for the construction the  of different type of works/items in bill of quantities (BOQs)  at Tehsil Bhag and Sub-Tehsil Bala Nari, District Kachi Balochistan. The offers from the successful bidders would form the basis for an award of a contract.

BIDDING DOCUMENTS

The following annexes form are and shall be an essential part of this Bid:

Annex A:                     Price Proposal / Bill of Quantities for the Construction of different structures/items

SECTION I: BIDDING INFORMATION

a) ACKNOWLEDGMENT

Bidders are requested to confirm the receipt of this ITB and send the expression of their intention to participate to the addresses (physical) provided in the “SUBMISSION OF BIDS” section of this ITB.

b) QUERIES

  1. Bidders are required to submit all their inquiries in respect of this invitation to bid by e-mail to spateirrigation@spopk.org till the 2 days earlier to the opening of tender or visit the office in office hours personally,.

IMPORTANT: Any direct correspondence of your offer with the responsible buyer will result in disqualification of the offer. Please bring your offer directly to the address provided in the “SUBMISSION OF BIDS” section of this ITB.

YOUR OFFER

Please submit your offer using the submission templates provided (Annex –A). It should conform to the following requirements and contain all information required. The offers not conforming to the requested format will not be taken into consideration for evaluation. Your offer should clearly include the following information:

IMPORTANT: Firms are required to quote all rates (for each job/work) without skipping any job/work in Annex A. Incomplete or partial bids will not be entertained and will be considered non-responsive and will be rejected, escalation of rates or withdrawal/ surrender in the submitted bid form is not allowed.

WORKING TIME: All the mentioned work must be completed as per the specifications/ instructions on the specified locations within by 30 May, 2022 or AS EALIER AS POSSIBLE after placement of the Work Order.

1) EARNEST MONEY: Your offer must be accompanied by 2% earnest money (refundable) of the total quoted amount in the shape of a call deposit or demand draft made out in (SPO Quetta Region) Successful vendor(s) will submit an additional 8% Security Deposit (refundable) in favor of SPO Quetta Region, before issuance of the Work Order (W.O). Call Deposit from unsuccessful bidders will be returned to the respective suppliers as soon as possible whereas the Security Deposit amount from the successful vendor(s) will be retained until completion of construction work.

2) OFFERS made for part of the requirement as listed in the attached Annex-A will not be accepted. Your offer below our estimated cost of 15% will not be accepted keeping in view that the quality of the work will not be compromised at any cost.

3) COST: The cost should include supply, labor, transportation, insurance, applicable taxes and any other charges of all required works/jobs.

4) CURRENCY: Your proposal must be prepared in Pakistani Rupees only.

5) LANGUAGE: Bids shall be prepared in English.

6)INSPECTION: Inspection of supplies and work-in-progress at any time with or without bringing into the knowledge of the vendor(s) is allowed under this ITB. The successful vendor(s) will facilitate the Project Engineer / Project Coordinator by SPO NC and Quetta Region & and the relevant provincial depart of district Kachi for the inspection(s). Please note that inspection charges resulting from the vendor’s default will be charged directly to the vendor.

7) WORKSITE: The different components under this Bid are located at different places and the contractor has to employ his working team at any location suitable for him.

8) PERFORMANCE SECURITY DELAYED CHARGES: Performance security @1% per day up to a maximum of 10% will be charged for late completion of work and the amount will be deducted from the security deposit already submitted to SPO Quetta Region. Performance Security will be charged up to a maximum of Fifteen (15) days thereafter, the Work Order (WO) can be canceled. The natural hazards will not be counted as a reason of delay.

9) BID VALIDITY: The bid submitted must remain valid for acceptance for at least (90) days from the Invitation to Bid closing date or as appropriate.

10) VENDOR’S GENERAL INFORMATION: The vendors are requested to complete and submit their offer the vendor’s general information form (attached), together with the necessary supporting documentation. All the companies are required to submit registration documents for example:

  • Pakistan Engineering Council Registration (In an appropriate category as per value of the tender)
  • And those applicable from the following documents
  • Certificate of Incorporation issued by PEC
  • National Tax Number
  • BRA Registration
  • Certified Audit Report of last three years (registered with ( ICAP)
  • Rate analysis in case of rate offered below estimated cost must be submitted with the financial bid
  • Equipment Capability related to project
  • The firm/ Contractor either blacklisted nor involved in any Litigation / Arbitration
  • (Attach all certificates and the affidavit (on non-judicial stamp paper of Rs. 100/=) of not blacklisting) not involved in any lit litigation/arbitration other documents

c) BID EVALUATION

1) Supplier Registration

The qualified vendors will be added to the Tender Analysis Report after investigation of suitability based on the submitted Vendor’s general information form and supporting documents.

This will be followed later by performance evaluation as a constructor such as:

  • Ability to respond quickly to Agency’s needs,
  • Timely completion/delivery.
  • Dependability of products and services.

2) Financial and Technical Evaluation

All bids from vendors will be evaluated based on:

  • Compliance with the mentioned specifications, criteria and competitive rates basis.

d) SUBMISSION OF BIDS

  • (one) sealed envelope containing technical part of the offer having the following documents;
  • .Duly filled Vendor’sGeneral Information Form
  • Valid Pakistan Engineering Council certificate
  • Certificate of Incorporation issued by PEC
  • National Tax Number Certificate& BRA registration
  • Certified Audit Report of last three years
  • Updated Company Profile
  • Call Deposit (2%) and 8 % security money deposit would be required for successful bidder
  • Deposit your bids on below given address

 

Chairman Procurement Committee

SPO Regional Office

H # 58A, Jinnah Town Smugli Road  QUETTA

Phone: 081- 286386-0812863702-1

All bids must be received latest Date and Time) 24th March 2022at05:00p.m.

LATE SUBMISSION OF BIDS: Bids received after the deadline for submission of bids and bids transmitted in any other manner than those indicated above will not be considered.

The offers must bear your official letterhead, clearly identifying your company.

Bid Opening: The Bids will be opened in front of the procurement Committee of SPO Quetta in the presence of its Committee Members on an appropriate date fixed by the company.

e) BID ACCEPTANCE

SPO Quetta Region reserves the right to accept the whole or part of your bid. Please note (The lowest offer is not the only criteria for acceptance of the offer). Information provided by the bidder will constitute the basis for the eventual award of the contract.

SPO has the right to select multiple vendors upon rates analysis and to  complete the entire task with the given time which is 30 May 2022.

f) CURRENCY AND PAYMENT TERMS FOR WORK ORDERS

Any Work Order (WO) issued as a result of this ITB will be made in Pakistani Rupees (PKR). Payment will be made in 3 installments (i) 30 advance or mobilization cost upon the request of the selected vendor (ii) 40% at the completion of 50% physical work done on the site and the remaining (iii) 30% final payment will be made upon completion of awarded work and after the verification of project engineer. Applicable Government tax(s) at an admissible rate(s)shall be deducted at source from the payment made to the selected vendor.

g) DISPUTE RESOLUTION

In case of any dispute or disagreement between SPO and the vendor, the dispute shall be referred to adjudication or arbitration in accordance with the laws of the Islamic Republic of Pakistan and the venue for the arbitration will be Quetta.

Yours sincerely,

Chairman Procurement Committee

Strengthening Participatory Organization Regional Office

58-A Jinnah Town, Near Pak Japan Cultural Center, Smugli Road

Quetta.

Annex – A

PRICE PROPOSAL SHEET / BOQ

 Description and Specifications

1. Excavation and construction of new drinking water ponds

  • 1.1 De-silting of existing earthen water

2. Drilling and development of shallow bore

2.1 Drilling of the test bore supply and fixing of LDPE Tank 300 gallons with electric/solar pump and other gadgets as per site requirement.

3. Construction of 140ft boundary wall and rehabilitation of 2 number gats of THQ BHAG

 

BILL OF QUANTITIES

STRENGTHING PARTICIPATORY ORGANIZATION (SPO) QUETTA REGION
DRILLING DEVELOPMENT OF BORE WITH MACHINES, CONSTRUCTION AND DESILTING OF  WATER POND, CONSTRUCTION OF BOUNDARY WALL AND S/F OF LDPE TANKS
BILL OF QUANTITY AND RATE UNDER SCHEDULE 2018 AND ON MARKET RATE
GENERAL ABSTRACT OF COST
Bill No Description QUANTITY Amount
  In PKR
1 CONSTRUCTION OF NEW EARTHEN WATER POND 07 NOS  
2 DESILTING OF EARTHEN WATER PONDS 10 NOS  
3 DRILLING AND DEVELOPMENT OF BORE 70 FT 25 NOS  
4 DRILLING AND DEVELOPMENT OF BORE 70 FT FOR TEST BORE HOLE 15 NOS  
5 CONSTRUCTION OF BOUNDRY WALL AND MAIN GATES REHABILITATION 01-JOB  
6 SUPPLY AND FIXING OF LDPE TANK 300 GALLONS 25 NOS  
       
       
       
       
  TOTAL RS. RS  
       
       

 

 

Rupees in Words: – ­­­­­­­­­­­­­­­­­_______________________________________________________

­­­­­­­­­­­__________________________________________________________________

Contractor’s Signature: –

 

 

CONSTRUCTION OF NEW EARTHEN POND FOR DRINKING PURPOSE IN VARIOUS AREAS IN BHAG DISTRICT KACHHI
  SUB HEAD NO-1 CONSTRUCTION OF NEW EARTHEN DRINKING WATER POND
BILL OF QUANTITY AND RATE UNDER SCHEDULE OF 2018 AND ON MARKET RATES
S.NO DESCRIPTION NO L W D QTY UNIT RATE AMOUNT
1 Excavation in shingle or gravel formation, undressed lead upto 100 ft. (30m) A) Manual (For Covered area of less than 250 sft)
i) Dry
               
  (S.I.No 3-9 A-1) 1 90 90 6 48600      
            48600 Cft    
2 Dressing and levelling of earthwork to designed section                
  (S.I.No 3-18-B) 1 90 90 6 48600      
            48600 Cft    
TOTAL    
   
New EARTHEN POND 07 NUMBERS    

 

REHABILITATION OF DRINKING WATER POND AT VARIOUS AREA OF BHAG DISTICT KACHHI
  SUB HEAD NO-2 SILT MUD CLEARANCE OF EARTHEN DRINKING WATER POND
BILL OF QUANTITY AND RATE UNDER SCHEDULE OF 2018 AND ON MARKET RATES
S.NO DESCRIPTION NO L W D QTY UNIT RATE AMOUNT
1 Desilting of disposal work collecting tank, including removal of
sludge upto 300ft (90m)
               
  (S.I.No 25-17-1) 1 70 70 5 24500      
            24500 Cft    
2 Dressing and levelling of earthwork to designed section                
  (S.I.No 3-18) 1 70 70 5 24500      
            24500 Cft    
TOTAL RS.  
  says  
 DESILTING WATER POND 10 NUMBERS RS.  

 

DRILLING AND DEVELOPMENT OF BORE WITH PUMPING MACHINERY/SOLAR VARIOUS BHAG NARI AREA DISTRICT KACHHI
  SUB HEAD NO-3 DRILLING AND DEVELOPMENT OF BORE  70 RFT
BILL OF QUANTITY AND RATE UNDER SCHEDULE OF 2018 AND ON MARKET RATES
S.NO DESCRIPTION NO L W D QTY UNIT RATE AMOUNT
1 Boring for tubewell in all types of soil except shingle, gravel and rock from ground bed to 100ft (30m) depth including sinking and withdrawing casing pipe & disposal of excavated material within 100ft (30m).5″ (125 mm) inner dia.                
  (S.I.No 27-1 C) 1 70     70      
            70 Rft    
2 Supplying uPVC blind pipe IIL, Dadex or equivalent make registered with PSQCA.3″ (250 mm) inner dia.CLASS-C.                
  (S.I.NO 27-48-B-I) 1 50     50      
            50 Rft    
3 Providing and installing uPVC strainer in tubewell bore hole including
sockets and solvent registered with PSQCA of the nominal inner
diameter.3″ (250 mm) inner dia.7 to 10 mm wall thickness.CLASS D 3 INCHES DIA
               
  (S.I.NO 27-16-VI) 1 20     20      
            20 Rft    
4 Supplying uPVC blind pipe IIL, Dadex or equivalent make registered with PSQCA. INCLUDING CARRIAGE CHARGES Loading and unloading mechanic mson etc charges complete in all respect upto completion of the work                
  (MARKET RATE)                
  1 ” Upvc pipe 1 30     30 Rft    
  2 ” Upvc pipe 1 40     40 Rft    
4 Supply of ptha using for chair for keeping the 1.5 HP motor for supporting with 5 kg, injector valve 02 nos, sockets 06 number of 1″ and 2″, tape for solution. Lying jointing sloution of pipe material complete in all resepct upto completion of the work.                
  (MARKET RATE)                
    1 1     1 Job    
            1 Job    
5 Providing and fixing at Site Electric Motor of KSB, Grandfos, Siemens
or approved equivalent (similar specifications), complete in all respects including all taxes.Electric Motor, 1.5 Hp AC AND DC MOTOR/ supply and fixing of SOLAR PLATES including all accessories complete in all respect
               
  (S.I.NO 27-65-b)                
    1 1     1 No    
            1 No    
TOTAL RS.  
G.TOTAL RS.
ONLY FOR SUCCESSFUL BORES BORE 25 NUMBERS RS.

 

DRILLING AND DEVELOPMENT OF BORE WITH PUMPING MACHINERY/SOLAR VARIOUS BHAG NARI AREA DISTRICT KACHHI
  SUB HEAD NO-3 DRILLING AND DEVELOPMENT OF BORE  70 RFT
BILL OF QUANTITY AND RATE UNDER SCHEDULE OF 2018 AND ON MARKET RATES
S.NO DESCRIPTION NO L W D QTY UNIT RATE AMOUNT
1 Boring for tubewell in all types of soil except shingle, gravel and rock from ground bed to 100ft (30m) depth including sinking and withdrawing casing pipe & disposal of excavated material within 100ft (30m).5″ (125 mm) inner dia.for checking purpose for failer of success                
  (MARKET RATE) 1       1      
            1 Job    
TOTAL RS.
G.TOTAL RS.
ONLY FOR TEST BOREHOLE IN FAILURE CASE TEST BORE 15 NUMBERS RS.

 

PROVIDING AND FIXING OF LDPE WATER TANKS

  SUB HEAD NO-3 PLASTIC TANKS
BILL OF QUANTITY AND RATE UNDER SCHEDULE OF 2018 AND ON MARKET RATES
S.NO DESCRIPTION NO L W D QTY UNIT RATE AMOUNT
1 Providing and fixing LDPE overhead tank manufactured by Dura or
equivalent on top of any floor 300 gallons
               
  (S.I.No 27-44-a) 1       1      
            1 Cft    
2 Fixing of tank i/c pipes sockets elbow tees bends valves etc complete in all respect                
  (MARKET RATE) 1       1      
            1 Job    
TOTAL RS.
  says
LDPE TANK 25 NUMBERS RS.

 

CONSTRUCTION OF BOUNDARY WALL AND REPAIR OF MAIN GATES FOR TEHSIL HEAD QUARTER HOSPITAL BHAG DISTRICT KACHHI
  SUB HEAD NO-4 CONSTRUCTION BOUNDARY WALL  & REPAIR OF GATES OF BHAG HOSPITAL
BILL OF QUANTITY AND RATE UNDER SCHEDULE OF 2018 AND ON MARKET RATES
S, NO DESCRIPTION NO L W H/D QTY: UNIT  Rate  Amount  
1 Excavation in foundation of buildings and bridges including layout, dressing, refilling around structures with excavated earth, watering & ramming lead upto 100 ft. (30m) & lift upto 5 ft. (1.5m)           .      
  i) in ordinary soil. (Building and Plinth )                  
  outer side wall 1 61.00 2.00 2.00 244.00        
    1 80.00 2.00 2.00 320.00        
  (S.I.No. 3-21-a-iv)       TOTAL 564.00 CFT      
2 Providing and laying plain hand mixed cement concrete using sand approved source and crushed aggregate having maximum size upto 1-1/2″ (38mm) & down gauge in foundation and plinth including
leveling, compacting & curing.
                 
  i)  Ratio 1:4:8                  
    1 61.00 2.00 0.25 30.50        
    1 80.00 2.00 0.25 40.00        
  (S.I.No. 5-4-b)       TOTAL 70.50 CFT      
3 Providing and laying cement concrete using approved coarse sand and crushed aggregate 3/4″ (19mm) & down gauge in foundation including leveling, compacting and curing.           .      
    1 61.00 2.00 2.00 244.00        
    1 80.00 2.00 2.00 320.00        
  (S.I.No. 5-8/c)       TOTAL 564.00 CFT      
4 Providing, fabricating and laying deformed Grade 60 steel reinforcement (deformed bar) for all kinds of R.C.C work in
foundation, plinth and ground floor including the cost of straightening, removal of rust, cutting, bending, binding, wastage and providing such over-laps as are not shown on the drawings. The cost of binding
wire and cement concrete spacer blocks or chairs for binding and holding the reinforcement in position is inclusive upto 15 ft. (5m)
height
          .      
    1 697.31 2440.59 2.50 2.50        
  (S.I.No. 5-65-a)       TOTAL 2.50 CFT      
5 Providing and laying first class solid burnt brick masonry (Brick Strength:1800psi-2000psi) including scaffolding, raking
out joints and curing in foundation and
substructure/Basement i/c cost of testing
          .      
  Ratio  1:5                  
  1 STEP 1 61.00 1.50 2.00 183.00        
  2 STEP 1 61.00 1.13 2.00 137.25        
  for 120 Rft                  
  1 STEP 1 80.00 1.50 3.00 360.00        
  2 STEP 1 80.00 1.13 3.00 270.00        
  (S.I.No. 11-3-AI)       TOTAL 320.25 CFT      
6 Providing and laying 1:2:4 cement concrete using approved coarse sand and crushed aggregate 3/4″ (19mm.) and down gauge in plinth band, door band and roof band of required shape or section including
formwork and its removal, compacting and curing in basement and ground floor but excluding the cost of reinforcement
          .      
    1 61.00 1.13 0.50 34.31        
    1 80.00 1.13 0.50 45.00        
  (S.I.No.5-49-c)       TOTAL 79.31 cft      
7 Providing and laying frist class solid brunt brick massonary i/c scafolding raking out joints in super structure etc.           .      
  Ratio  1:5                  
    1 141.00 0.75 6.00 634.50        
  (S.I.No. 11-12-b/iii)       TOTAL 634.50 CFT      
8 Providing and laying in situ cement concrete using approved coarse sand and crushed aggregate 3/4″ (19mm) and down gauge in pillars and columns of any shape in super structure including compacting,
curing, cost of form-work & its removal in basement and ground floor.
                 
    16 0.75 0.75 6.00 54.00        
  (S.I.No. 5-15-c)        TOTAL 54.00 CFT      
9 Providing and laying 1:2:4 cement concrete using approved coarse sand and crushed aggregate 3/4″ (19mm) and down gauge in precast shelves coping, cornices, eave boards, hood, fencing posts and manhole covers etc. including formwork & its removal, compacting and curing in ground floor                  
    1 141.00 0.75 0.25 35.25        
  (S.I.No.5-27-a)       TOTAL 35.25 sft      
10 3/4 inch (19mm) thick cement plaster using Coarse Sand on walls and columns in basement, plinth and ground floor including making edges, corners and curing.                  
   ( R.L TO 7′ – 3″ ) HIGHT 1 141.00   8.00 1128.00        
  (S.I.No.15-4-iii 15-18-i)       TOTAL 1128.00 sft      
11 Dismantling brickwork in lime or cement mortar upto 9″ width                  
    1 61.00   12.00 732.00        
    1 80.00   12.00 960.00        
  (S.I.No.4-13 A)       TOTAL 1692.00 sft      
12 Repair of main gate sizes 18’x6′ including piller repair with plaster with all civil work and paint on both sides  WITH welding complete in all respect upto completion of the work                  
    2       2.00        
  MARKET RATE       TOTAL 2.00 Job      
  Grand Total          

Attachments

Invitation to Bid Document (pdf)